Honda TRX 250 rims

Message

marshall100 · #1 Post by **marshall100** » Sun Nov 13, 2011 6:24 pm

Guys, do trx250 rims fit the cannondale? fond a pair of fronts to me which seem silly not to have if they fit.

cannondale27 · #2 Post by **cannondale27** » Sun Nov 13, 2011 8:26 pm

Will fit but offset is 1-4 so unless you have a set of +3 a-arms you will be much narrower than stock.

marshall100 · #3 Post by **marshall100** » Sun Nov 13, 2011 8:45 pm

Thanks man. I'll keep an eye on them as the tyres are good and as the rims fit they'll be handy for spares.

cannondale27 · #4 Post by **cannondale27** » Sun Nov 13, 2011 8:51 pm

They also use a tapered nut.Our studs have a longer shoulder than Honda so when you tighten the tapered nuts shoulder will mess up the first thread of the tapered nuts a little.

BlackToothGrin · #5 Post by **BlackToothGrin** » Sun Nov 13, 2011 9:43 pm

QUOTE (cannondale27 @ Nov 13 2011, 03:51 PM) <{POST_SNAPBACK}>

They also use a tapered nut.Our studs have a longer shoulder than Honda so when you tighten the tapered nuts shoulder will mess up the first thread of the tapered nuts a little.

If you know what thread pitch the stud is, you can get a die nut and thread the shoulder a little more.

MX Quad Dad · #6 Post by **MX Quad Dad** » Mon Nov 14, 2011 4:24 am

I put a set of honda wheels on mine for a day and just put a flat washer on the stud before the wheel