Page 1 of 1
MX tires
Posted: Sat Aug 09, 2003 2:41 pm
by KYmxracer52
What PSI do most peole run in the Holeshot MX's? I've always run Grooved Rikens and I bought me a set of the Holeshots, so I'm not sure what should be put in them. You usually run more in the Rikens.
Posted: Sat Aug 09, 2003 3:59 pm
by JeffQuadShop
Are you running beadlocks?
Posted: Sat Aug 09, 2003 8:22 pm
by KYmxracer52
I'm talking about the front tires, in case I confused anyone, but no, I'm not running beadlocks. Just the Douglas Ultimate fronts.
I run 12.........
Posted: Sat Aug 09, 2003 9:09 pm
by justfine
12 in the front and 6 in the rear as a rule. Might change rear for track conditions.
Posted: Sun Aug 10, 2003 3:13 pm
by haydug
12 sounds pretty close, but I have ran as high as 15 and went to 10 for some mud. Are you running 19" or 20"
Posted: Mon Aug 11, 2003 10:12 am
by KYmxracer52
20's
Posted: Tue Aug 12, 2003 2:29 pm
by josborn
I run on ohio clay, and use 10-12 in the front (holeshots) and
8-10 in the rear (tamers). Just depends on how soft or hard the track is.
Posted: Tue Aug 12, 2003 2:58 pm
by KYmxracer52
Well, the track I run on is clay as well. It starts out pretty loose, but as the laps proceed, it gets a blue groove in the corners.