How do I remove my axle? I got the wheel hubs & locknut off already. I have too remove the Rotor & Rotor Hub correct? If so how, I dont know how too get it off.
Thanks
Removing Stock Axle
You need to take the left hub off (sounds like you do) then take the dust cap off your sprocket hub, loosen the 3 small allen bolts and then loosen the whole locknut. Once it is loose enough, you can get to the clip and pop it out. Then slide the lock nut off, and your axle is ready to slide out. It makes it easier to put back in if you take your brake rotor hub off as well, but on a new bike or one that is not all corroded up it will slide right out.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
k cool, did you ever find my post?
http://cannondaleriders.com/vbb/showthread...=&threadid=2659
i found it:cool:
glad you got it out alrite, what kind of axle are you going with? RPM:head:
http://cannondaleriders.com/vbb/showthread...=&threadid=2659
i found it:cool:
glad you got it out alrite, what kind of axle are you going with? RPM:head: