Running axis or PEP

Message

cannondale27 · #1 Post by **cannondale27** » Thu Dec 05, 2002 12:54 pm

I would imagine that the 400ex protrax front would work since with protrax you get steering stem,spindles,a-arms and all the tierods.Centers of frame mounts for a-arms are same for 400ex and cannondale the 01 and early 02 you can put 400ex arms on its a perfect fit except the balljoint studs are too small tofit dale spindle.03 you would need some spacers for a-arm mounts.

cannondale27 · #2 Post by **cannondale27** » Fri Dec 06, 2002 1:14 pm

If you are just getting the arms from laeger that isnt a protrax front end.I dont know if leager is like lonestar but I wouldnt buy any arms that use a spacer to fit the balljoint to the cannondale spindles.

Cannibal440 · #3 Post by **Cannibal440** » Sat Dec 07, 2002 8:47 pm

For strength/safety reasons, I would imagine.

cannondale27 · #4 Post by **cannondale27** » Sat Dec 07, 2002 8:52 pm

Yes safety, if they loosen just a little they will disintegrate saw it happen.

cannondale27 · #5 Post by **cannondale27** » Mon Dec 09, 2002 7:05 am

Kory Ellis Protrax this is what a protrax front looks like you cannot use just the a-arms it is the best there is.I think it costs around $3000.Picture link doesnt work go to atvscene.com then click Kory Ellis then Moto2 and then picture.ProTrax front cannondale.

k_fulk · #6 Post by **k_fulk** » Mon Dec 09, 2002 9:36 pm

They should come with a sterring stem. I know they do with 250r's.

CdaleRacer0128 · #7 Post by **CdaleRacer0128** » Tue Dec 10, 2002 2:13 am

the nac's catalog reads on pg 30 haha that the cannondale kit comes wihtout a steering stem, uses ur existing stem while the honda kit uses the stem the c-dale doesnt

just to clear stuff up for u guys

i dont even see a listing for regular leager a-arms in here

k_fulk · #8 Post by **k_fulk** » Sat Dec 14, 2002 2:39 am

If you dont feel like waiting (as long) get the axis. There all good.