Page 1 of 1
Posted: Thu Dec 05, 2002 12:54 pm
by cannondale27
I would imagine that the 400ex protrax front would work since with protrax you get steering stem,spindles,a-arms and all the tierods.Centers of frame mounts for a-arms are same for 400ex and cannondale the 01 and early 02 you can put 400ex arms on its a perfect fit except the balljoint studs are too small tofit dale spindle.03 you would need some spacers for a-arm mounts.
Posted: Fri Dec 06, 2002 1:14 pm
by cannondale27
If you are just getting the arms from laeger that isnt a protrax front end.I dont know if leager is like lonestar but I wouldnt buy any arms that use a spacer to fit the balljoint to the cannondale spindles.
Posted: Sat Dec 07, 2002 8:47 pm
by Cannibal440
For strength/safety reasons, I would imagine.
Posted: Sat Dec 07, 2002 8:52 pm
by cannondale27
Yes safety, if they loosen just a little they will disintegrate saw it happen.
Posted: Mon Dec 09, 2002 7:05 am
by cannondale27
Kory Ellis Protrax this is what a protrax front looks like you cannot use just the a-arms it is the best there is.I think it costs around $3000.Picture link doesnt work go to atvscene.com then click Kory Ellis then Moto2 and then picture.ProTrax front cannondale.
Posted: Mon Dec 09, 2002 9:36 pm
by k_fulk
They should come with a sterring stem. I know they do with 250r's.
Posted: Tue Dec 10, 2002 2:13 am
by CdaleRacer0128
the nac's catalog reads on pg 30 haha that the cannondale kit comes wihtout a steering stem, uses ur existing stem while the honda kit uses the stem the c-dale doesnt
just to clear stuff up for u guys
i dont even see a listing for regular leager a-arms in here
Posted: Sat Dec 14, 2002 2:39 am
by k_fulk
If you dont feel like waiting (as long) get the axis. There all good.