I need mine a little wider.....

Message

justfine · #1 Post by **justfine** » Mon Feb 03, 2003 2:35 pm

Does anybody have any ideas for getting the Moto to a full 50"? I think the front and back could use about an inch and a half. Any help would do.

cannondale27 · #2 Post by **cannondale27** » Mon Feb 03, 2003 10:50 pm

If you can get the ride height in the front lower by using a true zps setup you will get 50in.The back just get rims that are offset to what you need.I think the quadshop guys were getting zps springs for the regular Ohlins from somewhere they should be able to setup the moto shocks same way since the speed and moto main springs are exactly the same.

JeffQuadShop · #3 Post by **JeffQuadShop** » Fri Feb 21, 2003 2:22 pm

Yep were using Elka springs and valving!
Our conversion is on the left and stock is on the right

311racer · #4 Post by **311racer** » Sat Feb 22, 2003 10:59 pm

if you sit on your quad dosen't it sit 50+ in. in the front.