Page 1 of 1
I need mine a little wider.....
Posted: Mon Feb 03, 2003 2:35 pm
by justfine
Does anybody have any ideas for getting the Moto to a full 50"? I think the front and back could use about an inch and a half. Any help would do.
Posted: Mon Feb 03, 2003 10:50 pm
by cannondale27
If you can get the ride height in the front lower by using a true zps setup you will get 50in.The back just get rims that are offset to what you need.I think the quadshop guys were getting zps springs for the regular Ohlins from somewhere they should be able to setup the moto shocks same way since the speed and moto main springs are exactly the same.
Posted: Fri Feb 21, 2003 2:22 pm
by JeffQuadShop
Yep were using Elka springs and valving!
Our conversion is on the left and stock is on the right
Posted: Sat Feb 22, 2003 10:59 pm
by 311racer
if you sit on your quad dosen't it sit 50+ in. in the front.