Cannondaleriders

is there i can order the bearings online from a bearing store. i know i should be able to get all 4 with seals for around 25 dollars

The bearings are the same as the ultra expensive mutants they use in the Honda sport quads. The seals are not the same . The size is in the parts manual. If you can get 4 of those bearings and 2 seals for anywhere near $25 let me know. Maybe the prices came down in the last few years I remember those bearings were about $20 each.
I know one way to get many thousands of miles out of them is to carefully pry the dust lips off them and pack them with grease before instalation.

I got Axle bearing from Doug about a month ago i believe i payed 40 for them but dont quote me on that give him a call see wat he has got

I paid like 100 bucks for two sets of honda bearings from a local dealer.:cry: I believe i got pivot works brand. The seals do work too, atleast they did for me.

You might want to recheck those seals. I seem to remember that the honda seals had a larger ID than the Dale hub OD and there would be a gap between the two.

Ya, I thiink your right. Ill be sure to do a b earing and seal check. I retract my previous statement on the seals for now.

I went with the Honda bearings as well.

Are these bearings Tapered Roller Bearings or Ball Bearings?

Sealed bearing #6908 I think. Just ball bearings I think?

Atvaddiction sells a complete kit w/ bearings and seals from ALL BALLS for just under $40.