Page 1 of 3
Stainless Steel SOLID Swingarm Bolt Kit
Posted: Thu Dec 16, 2004 5:28 pm
by kdeal
How many of you guys would be interested in a solid stainless steel swingarm bolt with a stainless washer and nylok nut? These would be made by a very reputable machinist and be made out of a good grade of stainless steel. The only change from factory would be the thread pitch on the end of the bolt (I would do them in a coarser thread pitch to use a more common nylok nut) I have some prices floating around in the air. How many would be interested if I was able to get these with washer and nut for $50 each shipped to you? Let me know.
Ken
Posted: Thu Dec 16, 2004 6:48 pm
by claas900
..Sounds good to me,but why a different nut?..I have an SS nut for my stock S/bolt..its not a locking nut tho..
Posted: Thu Dec 16, 2004 7:08 pm
by Derno24
Sounds like a good idea! I would take 2 at that price.
Posted: Thu Dec 16, 2004 7:18 pm
by TheJaspMan
I'd be into a couple of those Ken.
Posted: Thu Dec 16, 2004 7:18 pm
by r.porter
I don't mean to step on your post but since the bolt is being talked about. Would any body be interested in one made out of titanium?
Posted: Thu Dec 16, 2004 9:19 pm
by JeffQuadShop
Whats the matter with the stock ones? I know the old hollow ones broke but the new ones hold up great.
Posted: Thu Dec 16, 2004 9:29 pm
by USAMoto00
I'd be interested in Titanium for sure!:usa
Posted: Thu Dec 16, 2004 9:36 pm
by jfarrar
id take one
Posted: Thu Dec 16, 2004 9:47 pm
by Canniboomer
The finer pitch thread would have less tendency to get burred up
coming and going. I'd consider with the same thread size/pitch.
Posted: Thu Dec 16, 2004 9:51 pm
by haydug
QUOTE
Originally posted by r.porter
I don't mean to step on your post but since the bolt is being talked about. Would any body be interested in one made out of titanium?
For $50?? I'll take one