Cannondaleriders

When the front wheels of my 02 Blaze are off the ground, I can only turn to the right about 3/4 of the way. Is this a normal thing or do I have something hitting?

did you check to see if your damper was letting the stem turn all the way sometimes they bind and dont let the wheels turn all the way

Well, they turn fine when the front is on the ground. Its no big deal, I wont have my bars turned like that in the air, Im just wondering if theres a problem.

are the tie rods hitting when the suspension is in the air? Did you check that I know that cannondale changed some things on the steering stems so that might be the problem just a guess

It doesnt look like they are at enough of an angle to bind up. It turns almost all the way left. I read somewhere that the 03 stem was re-designed to keep the tie rod ends from doing this on a long travel set up.

I have an 03 cannibal setup like a blaze and I have had mine on the lift and I dont have the issues you are having I will put mine on the lift and see if I can try to see what is happening seems kinda wierd to me:confused:

are you running stock suspension?

All stock except for TQS tripple rate converions on the front Blaze Ohlins.

You may have a balljoint binding when the suspension is hanging all the way down.

my moto does the same thing when lifted in the air if i watch i can see the a arm lift on one side depending on which way i turn the bars but only does it do this when in the air