Page 1 of 1
Updating my tie-rods/ends?
Posted: Fri Mar 25, 2005 9:55 pm
by exracer12
what other tie-rods and ends will fit the cannibal with out doing modifications? will they fit from a 400ex?
Posted: Fri Mar 25, 2005 10:16 pm
by Derno24
Well you can modify a set of 400ex's to fit, but I believe they will hit the frame. Or you could get a set of improved ends from Brad at Black Widow.
.
Posted: Fri Mar 25, 2005 11:56 pm
by exracer12
price range on the black widow ones? and im just worried that the way these are built, that it will just pop off when riding hard?
is there a web site for black widow?
Posted: Sat Mar 26, 2005 12:13 am
by Josh
Posted: Sat Mar 26, 2005 12:21 am
by Derno24
I think $38 for the set. I also have never seen one pop off. Although I am sure it is possible if you leave it go for A really long time.
Posted: Sat Mar 26, 2005 2:41 am
by claas900
..id like to find a sealed ball joint also.
This is the place
Posted: Sat Mar 26, 2005 5:43 pm
by MotoX_Racer07
Go to
www.rodendsupply.com They have the best tie rod ends I have seen yet. I can't wear these things out or get any play out of them. Here are the part numbers: You will need two XFR8 (right side) and two XFL8 (left side) They are pretty cheap too ... I paid like 8 bucks each for them a year ago. They are teflon injected with an aluminum body. The number is 1-800-284-2902 ... Check them out! You won't be disappointed.
Posted: Sun Mar 27, 2005 9:38 am
by cannondale27
I believe those are the ones BlackWidow sells.Retroz also was getteing them.I have them and like said they seem indestructable.Mine are stainless though teflon injected.
Posted: Sun Mar 27, 2005 4:09 pm
by acarli3
sounds right. Brad at Blackwidow ATV has them new and as cheap as you'll find them.