Need a new sleeve and piston?
Need a new sleeve and piston?
I have a few brand new, never been used or installed, pistons and sleeves (95mm) with rings for sale. these are matched sets. diamondracingatv.com BTW, as soon as the sleeves become available, I also have the 97mm, 450, pistons and rings. the sleeves are the correctly dimpled ones
Southbay is an excellent choice for your motor also. I think their 460 kit is the same as ours ...97mm with a 1 mm stroker crank, we have a couple of the cranks ourselves but not enough that we will sell them anytime soon, if Dustin has the parts you'd probably be better off having them do your motor as we are putting most of our time into rebuilding the stock cranks and building a-arms, swingarm and steering stems. Most motor work is being put off till winter if possible.
I have 1, 450 sleeve and piston with rings left in stock (97mm.) for sale. if you'd want to install it yourself or have a dealer do it for you. or you could call Dustin @ southbaymoto, they do them too. We'd do it for you, but to tell you the truth, we are very busy at this time of year and it would be a while before we could get to it. E-mail me at diamondracing@cs.com if you want it.
215? sounds very cheap to me. and the ones i have are "matched for clearance sets" straight out of c-dale R&D, no tight or loose fitting bores here. and these are not the spotted "too deep" sleeves. nothing worse than buying parts and finding out later that they are not perfect. At this time the only other place I'd buy piston and sets is from southbay moto, as alot of bad sleeves were at the c-dale plant (cases of them). and someone will be selling them sooner or later. I stand behind everything we sell, unless I tell the customer different such as "this part is a prototype, let me know if you find any problems with it, and we'll give you a new one".