oil in the filter, do not need update, look

Message

haydug · #1 Post by **haydug** » Fri Oct 03, 2003 2:18 am

I had a dealer bring me a bike, it is spitting oil into the back of the air filter, from the breather tube on right side of spar. This bike has the oil update kit done. When you remove the air filter, it almost acts as if there is a vaccum from this hose, and spitting oil out when you rev the motor. Any one encounter this before??

thomez · #2 Post by **thomez** » Fri Oct 03, 2003 2:40 am

I have no experience whatsoever but from what I've read it is most likely over filled? Maz just wrote a tech tip on oil filling over in the other forums ya might want to check that out for relevant info. Good luck.

out4ya · #3 Post by **out4ya** » Fri Oct 03, 2003 5:50 am

I am having the same exact problem. It is not too much oil, in fact it blew all the oil out. YES, I said all the oil. I've done several checks to ensure oil pumps are working. Did lead down test and all was good. I'm out of things to check. Any insight would be appreciated.

thomez · #4 Post by **thomez** » Fri Oct 03, 2003 6:18 am

What about that check ball that people talk about having trouble with?

cannondale27 · #5 Post by **cannondale27** » Fri Oct 03, 2003 11:10 am

Try doing what guy did.Should cover everything.
http://cannondaleriders.com/vbb/showthread...light=airfilter

Cannondaleriders

oil in the filter, do not need update, look

oil in the filter, do not need update, look

Oil in Filter