KTM sprocket difference

Message

pdavis · #11 Post by **pdavis** » Mon Jan 12, 2004 6:59 pm

you are right, 14 on right, i almost bought a KTM sprocket but i noticed the offset and stayed away

Bags · #12 Post by **Bags** » Mon Jan 12, 2004 8:49 pm

Sorry...was a little tired when I did that. lol

pdavis · #13 Post by **pdavis** » Mon Jan 12, 2004 9:41 pm

BAGS, is that a picture of you in your avatar?

LapTraffic · #14 Post by **LapTraffic** » Mon Jan 12, 2004 9:51 pm

I am running a 14 tooth from Rocky Mountain. It was 6 bucks or something like that.

I'll check tonight, I believe it has that raised area... I have that in toward the case. I'm not noticing any wear though.

Bags · #15 Post by **Bags** » Tue Jan 13, 2004 2:06 am

Thats my UPS driver around here.

:head:

Jaybr · #16 Post by **Jaybr** » Tue Jan 13, 2004 4:19 am

UPS is looking better all the time

You can get the slave cylinder direct from Magura for $55

Contact:

Peter Ubellacker
MAGURA USA
1902 MILLER DRIVE
OLNEY, IL 62450
PH 618 395 2200 extn. 23
FX 618 395 4711
peter@magura.com

pdavis · #17 Post by **pdavis** » Tue Jan 13, 2004 12:25 pm

years ago, i had a UPS girl get fired because she was in playboy, sued, and got her job back, and the best thing was, just cuz she was in playboy, she didnt act all " i am better than you" we could still get her to come to our local sports bar and drink some beer and just hang out, it was a good time, me and my buddy walk into a sports bar with chick that was in playboy, man that was fun, and i am not the best looking guy in town

thomez · #18 Post by **thomez** » Tue Jan 13, 2004 11:44 pm

Thanks for that info Jay, next time mine gets whacked by my chain I'll know how to not bother Doug to get one

Jaybr · #19 Post by **Jaybr** » Tue Jan 20, 2004 3:04 am

My sprockets got here today from Rocky Mountain and they are Cannondale sprockets not KTM. They are not offset on one side.

At $6.99 you can't beat it.

JeffQuadShop · #20 Post by **JeffQuadShop** » Tue Jan 20, 2004 2:50 pm

You can run the KTM sprocket with no problem as long as you put the spacer to the inside. I ran them all year with no problems at all.