My cutdown HMF

Message

Brad77 · #11 Post by **Brad77** » Fri Mar 26, 2004 3:55 am

hmmmmmm,

I don't know how Bags did hiss but on my Big Gun I simply installed another sticker that I already had.

thomez · #12 Post by **thomez** » Fri Mar 26, 2004 4:32 am

Isn't the HMF sign just riveted on? Re-rivet it.

Bags · #13 Post by **Bags** » Fri Mar 26, 2004 12:07 pm

Its just some 1/8" rivets that hold the label on. To do it correctly, you must flare the inner core out with a large socket and large hammer to get the outer insert to hold in place and to keep the inner core from rattling inside. I just placed a socket in the inner core, a 1 1/2" I believe and kept on hitting it until it was wide enough to accept the outer insert. Then just drill new holes for some rivets and your good to go.

TheJaspMan · #14 Post by **TheJaspMan** » Fri Mar 26, 2004 12:18 pm

Does the HMF cut short require map adjustments? Meaning map adjustments to what ever you were originally running it with at full length.

Derno24 · #15 Post by **Derno24** » Fri Mar 26, 2004 2:02 pm

I think you need to fatten up a lil to make her run just right...

TheJaspMan · #16 Post by **TheJaspMan** » Fri Mar 26, 2004 2:11 pm

QUOTE

Originally posted by Derno24
I think you need to fatten up a lil to make her run just right...

Look, I am already 220 pounds. If I gain any more weight I won't be able to ride at all!

Derno24 · #17 Post by **Derno24** » Fri Mar 26, 2004 4:24 pm

Hardy har har. Actually I had to go back and read what I wrote. The brain is working slooooowwww today.

I am right there with you though anymore weight and I'll have to move to a truck to carry my fat azz down the trail.

quad_freak14 · #18 Post by **quad_freak14** » Fri Mar 26, 2004 5:58 pm

i have a nac's moto map...will it be ok?

Derno24 · #19 Post by **Derno24** » Fri Mar 26, 2004 7:48 pm

Should be ok, but you may want to look into the tc map. It was designed for the shorter exhaust.