Engine, intake, exhaust, EFI, chain, sprockets, etc.
Brad77
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#11
Post
by Brad77 » Fri Mar 26, 2004 3:55 am
hmmmmmm, I don't know how Bags did hiss but on my Big Gun I simply installed another sticker that I already had.
thomez
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#12
Post
by thomez » Fri Mar 26, 2004 4:32 am
Isn't the HMF sign just riveted on? Re-rivet it.
Bags
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#13
Post
by Bags » Fri Mar 26, 2004 12:07 pm
Its just some 1/8" rivets that hold the label on. To do it correctly, you must flare the inner core out with a large socket and large hammer to get the outer insert to hold in place and to keep the inner core from rattling inside. I just placed a socket in the inner core, a 1 1/2" I believe and kept on hitting it until it was wide enough to accept the outer insert. Then just drill new holes for some rivets and your good to go.
TheJaspMan
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#14
Post
by TheJaspMan » Fri Mar 26, 2004 12:18 pm
Does the HMF cut short require map adjustments? Meaning map adjustments to what ever you were originally running it with at full length.
Derno24
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#15
Post
by Derno24 » Fri Mar 26, 2004 2:02 pm
I think you need to fatten up a lil to make her run just right...
TheJaspMan
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#16
Post
by TheJaspMan » Fri Mar 26, 2004 2:11 pm
QUOTE
Originally posted by Derno24 I think you need to fatten up a lil to make her run just right...
Look, I am already 220 pounds. If I gain any more weight I won't be able to ride at all!
Derno24
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#17
Post
by Derno24 » Fri Mar 26, 2004 4:24 pm
Hardy har har. Actually I had to go back and read what I wrote. The brain is working slooooowwww today. I am right there with you though anymore weight and I'll have to move to a truck to carry my fat azz down the trail.
Derno24
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#19
Post
by Derno24 » Fri Mar 26, 2004 7:48 pm
Should be ok, but you may want to look into the tc map. It was designed for the shorter exhaust.