Oil filter conversion
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
Oil filter conversion
Has anyone ever thought about machining a replacement cover for the dale that would switch filters to something like a 400ex filter? Or has anyone seen one available?
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
I've got one of each, but I'm probably switching to paper on them both shortly.
I've been told that the paper filters do a much better job of filtering. I've also heard theory that alot of our crank bearing problems are from poor oil filtration. I'm not trying to lean anyone in one direction or another, just stating what I've heard.
I've been told that the paper filters do a much better job of filtering. I've also heard theory that alot of our crank bearing problems are from poor oil filtration. I'm not trying to lean anyone in one direction or another, just stating what I've heard.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
I am probably a little excessive about changing my oil. But with some of the research I am doing I have to use all new products each time or the tests don't make any sense.
I looked at the metal reusable filters. But I would worry about not getting all the small particles out and slowly loosing proper flow. The paper ones 'should' be cheaper than they are. My car oil filter only costs $7. It doesn't make any sense.
I can get 400ex filters for about $1.98. And they are very, very close to the cannondale size. I was hoping someone else had noticed and made a longer oil cap that would accomidate a little longer filter.
I looked at the metal reusable filters. But I would worry about not getting all the small particles out and slowly loosing proper flow. The paper ones 'should' be cheaper than they are. My car oil filter only costs $7. It doesn't make any sense.
I can get 400ex filters for about $1.98. And they are very, very close to the cannondale size. I was hoping someone else had noticed and made a longer oil cap that would accomidate a little longer filter.
my big concern with the metals is the lack the pressure relief valve......For what its worth here is a quote from a email Maz sent me:
DO NOT....go w/ a SS oil filter.
We have extensive testing that we did (while at Cannondale)
And have rock solid proof that the SS does not filter near well enough to
protect
the crankshaft, Every SS oil filter user will lose a crank due to this.
I wont even sell the SS one for this reason.
The paper ones filter the best.
-MAZ
DO NOT....go w/ a SS oil filter.
We have extensive testing that we did (while at Cannondale)
And have rock solid proof that the SS does not filter near well enough to
protect
the crankshaft, Every SS oil filter user will lose a crank due to this.
I wont even sell the SS one for this reason.
The paper ones filter the best.
-MAZ
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
QUOTE
Originally posted by wistech
I was going to try to build an adapter but with new filters coming down so much in price its pointless now. And a 400ex filter isnt even close to fitting in that housing. I was at the parts store checking sizes and nothing they had on the shelf would compare.
I was going to try to build an adapter but with new filters coming down so much in price its pointless now. And a 400ex filter isnt even close to fitting in that housing. I was at the parts store checking sizes and nothing they had on the shelf would compare.
My bad. I must have grabbed something else when I was comparing. Let me check and see if it my wifes Kawi filter. I grabbed from our 400ex bin and ASSumed that is what I was holding. :furious: :hammer: