Mounting Handle Bars & Exhaust
Mounting Handle Bars & Exhaust
alright just a few quick questions here
i have an 03 cannibal le, and i have a pair of tag t5 bars that im ready to mount. but im curious, do i use the same clamp that is holding my stock bars, and would this involve morving the ingnition? ive read somewhere once about some sort of mounting plate? do i need one?
and when changing the header, are those crush nuts nessessary? or will the old ones work, but the new ones just create a tighter seal? and do you need any kind of high temp sealent when putting the pipe on the header?
thanks
any help would be great
i have an 03 cannibal le, and i have a pair of tag t5 bars that im ready to mount. but im curious, do i use the same clamp that is holding my stock bars, and would this involve morving the ingnition? ive read somewhere once about some sort of mounting plate? do i need one?
and when changing the header, are those crush nuts nessessary? or will the old ones work, but the new ones just create a tighter seal? and do you need any kind of high temp sealent when putting the pipe on the header?
thanks
any help would be great
Let's see. If you have a tag x-5 set of handlebars then you can just replace them for the stockers no mods except removing the center support on the handlebars. Now if you have tag t-2's then you need fatty clamps and a place to mount the key switch and stuff. Someone just drilled a hole in the headlight delete and put it there and some people use the key switch mounting plate.
As for the header I just replaced mine with the nuts that were with it and it worked ok. No sealant, but if you want to be safe get new crush washers.
As for the header I just replaced mine with the nuts that were with it and it worked ok. No sealant, but if you want to be safe get new crush washers.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
QUOTE
Originally posted by rob_me686
awsome
yeah they are the x5 bars not the t2s
so does that black plastic piece just come off and then can be reinstalled over the new bars in the same place
im not plannin on gettin a kill switch anytime soon so i wasnt going to do the mounting plate way but thanks for the reply!
awsome
yeah they are the x5 bars not the t2s
so does that black plastic piece just come off and then can be reinstalled over the new bars in the same place
im not plannin on gettin a kill switch anytime soon so i wasnt going to do the mounting plate way but thanks for the reply!
Yeah you have to take the pad mount bar off the handlebars though. This way you can get to the key switch...
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm