Airbox

Message

guthrie08 · #1 Post by **guthrie08** » Sat Feb 19, 2005 10:24 pm

how do i go about removing the entire airbox, i got the top off, im stuck on removing the base, thanks

thomez · #2 Post by **thomez** » Sat Feb 19, 2005 10:33 pm

The bottom is held onto the throttle body by a large hose clamp that you will need to loosen.

guthrie08 · #3 Post by **guthrie08** » Sun Feb 20, 2005 8:18 am

thanks, is there any connections i have to unplug?

raptor0443 · #4 Post by **raptor0443** » Sun Feb 20, 2005 1:21 pm

yes there are two they are on the right side bottom of the box one is a vacuum hose the other is a sensor that you need to unplug but you can get the air box loose and get it up to where you can get to them a little better.

raptor0443 · #5 Post by **raptor0443** » Sun Feb 20, 2005 1:25 pm

also when to put the box back on put the clamp in a position to where you can get to it easier to tighten and loosen hope this helps:)

guthrie08 · #6 Post by **guthrie08** » Sun Feb 20, 2005 10:14 pm

thanks for all the help

guthrie08 · #7 Post by **guthrie08** » Mon Feb 21, 2005 8:36 pm

another question, which clamp do i take off. the one directly below the airbox, or the one below that on the throttle body.

KRMit · #8 Post by **KRMit** » Tue Feb 22, 2005 1:27 am

QUOTE

Originally posted by guthrie08
another question, which clamp do i take off. the one directly below the airbox, or the one below that on the throttle body.

I found it easier to loosen the bottom clamp that holds the boot on the intake. I'm a newbie though.

Jctmotorsports · #9 Post by **Jctmotorsports** » Tue Feb 22, 2005 2:03 am

I like to say some mean things to mine, Then it usally backfires and blows the dam thing right off.....

guthrie08 · #10 Post by **guthrie08** » Wed Feb 23, 2005 10:30 pm

i almost have it off, i have all the clamps loose, the two plugs unplugged, and it still wont slide off, what else do i need to loosen or remove, thanks.