I see . You might want to install the stockers and retry. Never heard of an issue with clutch slippage unless there was something out of adjustment. The fx400 clutches were upgraded to the heavy duty clutch that the 02 and newer engines use. I believe the problem ones were gold colored and the plates were aluminum.
The heavier springs might be the ticket for the nitrous engines.
Clutch problems
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
I think I remember having a slight drag on one of the race quads. I put it in 5th gear,held the brakes and did a couple of full power slippage stalls. Must have had some high spots that burned smooth after that. Is your clutch just totally locked up or just dragging hard on the release? Can you feel it in the lever pulling the pressure plate off the pack.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
I have the stock thin fiber plates. I have nine of them.
Yes the pressure plate moves in and out.
I have everything installed correctly.( everything there thats needed)
Yah when I pull in the clutch lever and try to turn the tires by hand it just drags really hard. It just takes alot of strength to move the tires.
thanks for the help guys this is keeping me going on the Dale.
Yes the pressure plate moves in and out.
I have everything installed correctly.( everything there thats needed)
Yah when I pull in the clutch lever and try to turn the tires by hand it just drags really hard. It just takes alot of strength to move the tires.
thanks for the help guys this is keeping me going on the Dale.