Page 2 of 2

Posted: Sat Apr 04, 2009 1:27 pm
by kdeal
Retail is about $63. I found them on the net for around $50 each. I have picked up the older ones on Ebay for anywhere from $20 to $40 each. I have also seem the older one going for as much as $139.95 erach!!!! But the true suggested retail price is in the $60 range.

DISCLAIMER: Harley injectors can only be used with motors that need more fuel flow. They also require a map made for their different flow rates.

Posted: Sun Apr 05, 2009 12:12 am
by Happyboy
so, why are people still going after the harley injectors when Edlebrock makes a set we can use?

Stockers--EDL-3574 19lb--http://www.amazon.com/Edelbrock-3574-Fuel-Injector/dp/B00068P970/ref=sr_1_3?ie=UTF8&s=automotive&qid=1238889995&sr=8-3
bigger motors--EDL-3853 --29lb

and for any of you junkies...the whole list.

Fuel Injector 60 lb/hr @ 43 psi; 85 lb/hr @ 87 psi, high impedance (set of 8) #3686
Fuel Injector 60 lb/hr @ 43 psi; 85 lb/hr @ 87 psi, high impedance (1 only) #3687
Pico Fuel Injector 19 lb/hr @ 45 psi (1 only)
for #3501, #3502, #3505, #3506, #3562 & #3563 #3574
Pico Fuel Injector 29 lb/hr @ 45 psi (set of 8) for #3503, #3507,
#3509, #3521, #3526, #3530, #3531, #3541, #3551, #3564 & #3565 #3853
Pico Fuel Injector 29 lb/hr @ 45 psi (1 only) for #3503, #3507,
#3509, #3521, #3526, #3530, #3531, #3541, #3551, #3564 & #3565 #3583
Pico Fuel Injector 35 lb/hr @ 45 psi (set of 8) for #3508 #3636
Pico Fuel Injector 35 lb/hr @ 45 psi (1 only) for #3508 #3635
Pico Fuel Injector 44 lb/hr @ 45 psi (set of 8) for #3550 #3684
Pico Fuel Injector 44 lb/hr @ 45 psi (1 only) for #3550 #3685

Posted: Sun Apr 05, 2009 1:47 am
by kdeal

Posted: Sun Apr 05, 2009 2:44 am
by Happyboy
exactly

Posted: Sun Apr 05, 2009 8:17 pm
by cannondale27
Hey, you see they have a TPS sensor just like ours, also? Fuel pump I bet is same too.

Posted: Mon Apr 06, 2009 4:37 pm
by proflow
Ive been using the Edlebrock injectors Kdeal originally found on my Timbo 505 for a year now & they are perfect. Like has been said before--these are only for heavily modified engines, do not install these in a stocker.----Proflow