Page 3 of 3
Posted: Wed Jan 21, 2004 2:07 pm
by OCR
Jeff, was there any problem running the spacer to the inside, like the chain derailing? I have the sidewinder sprocket sitting here and am wondering if I should send it back for the Cdale sprocket (backordered) or just go ahead and use the KTM?
Posted: Wed Jan 21, 2004 2:38 pm
by haydug
I have the KTM sprocket on my woods bike, 3 GNCC's, a hatfield trip, a GP, and numerous practice's with no problems. I freaked out when I say Bag's post and went and checked mine out. I pulled the chain off and checked both sprockets for signs of unusual wear and found nothing, so I put it back on. I also talked with Wink, he said his boy ran a KTM sprocket for a year with no problems.
Posted: Wed Jan 21, 2004 2:47 pm
by pdavis
Jay are those 6.99 sprockets 14 T or 13?
are all KTM sprockets the same ? a 125 sx same as 450exc for example ?
Posted: Wed Jan 21, 2004 2:54 pm
by OCR
Thanks Doug... did you have to grind down the sprocket at all or did it bolt right up?
Posted: Wed Jan 21, 2004 3:31 pm
by JeffQuadShop
Just bolt it right on with the spacer to the inside. Thats the only one we run on ours.