Cannondaleriders

Okay, I need help how I should hook these back up. I took out my ecu and the vacuum hose pulled the other ones out.
1. Ecu vacuum hose to T connector.
2. Vacuum hose from air box to T connector.
3. The only other hose on the T, were should it go??
4. The top of the motor has a vacuum hose going down, does that go to the vacuum pump or does that just vent off behind the radiator.

What I think isthat the loose hose on the t connector goes to the vacuum pump, then the engine hose just goes behind radiator. Or do I have it backwards. The engine hose was connected to the vacuum pump, but it seemed short and tight. I don't know.

Is there a picture of this anywhere or can someone guide me through it.

Thanks.

There isnt a vacuum pump I think what you are refering to is fuel pressure regulator.The hose on top of motor there are two water pump vent waterpump to bottle.I have a quad apart right now if you want email me and I will give you my phone and we will walk through stvspiering@aol.com

hey, there should be one hose from the ecu to the T, then from the tee to the bottom of the air box, then the other part of the T should go to the bottom of the fuel pressure regulater, where your fuel hoses come together on the right side just behind the radiator, hope this helps.

Thanks for the help. I got it figured out now.