Page 1 of 2
More Power
Posted: Wed Oct 19, 2005 3:04 pm
by moto31
I have a Moto that has a stock engine with a Wiley Co. exhaust. I want to get the most power possible without spending a fortune. How much of a power gain would I get with a stock bore stroker, ported head, reangled injectors, and a WWE piston kit?
Posted: Wed Oct 19, 2005 3:06 pm
by moto31
and the Canniboomer air box mod
Posted: Wed Oct 19, 2005 3:20 pm
by kdeal
My guess would be between 50-55 hp if well tuned. You would have a 465-469cc motor with porting and free breathing. Very good combo!!
Posted: Wed Oct 19, 2005 3:23 pm
by Happyboy
holy cow...the missouri dale owners are coming out of the wood work!! there are a few things you can do to get 3-4 hp out of the quad reasonably cheap. If you want 7 hp then I would go to at least the stroker.
Posted: Wed Oct 19, 2005 3:24 pm
by Happyboy
QUOTE
Originally posted by kdeal
My guess would be between 50-55 hp if well tuned. You would have a 465-469cc motor with porting and free breathing. Very good combo!!
Thats a bit high man. Right now 50hp is the peak out of those motors. And anything above that was with 0 intake restrictions.
Posted: Wed Oct 19, 2005 3:28 pm
by moto31
So you think around 50? What's stock?
Posted: Wed Oct 19, 2005 5:25 pm
by Happyboy
stock is ~40.
Posted: Wed Oct 19, 2005 5:42 pm
by CptHook
What about the shorter air horn from brad? Thats only like $20 and its good for a couple ponies
Posted: Wed Oct 19, 2005 6:57 pm
by theJeStEr1340
a stock bore stroker, port and polish and boomer airbox should be a little under $1000 and put you around 50hp.
Posted: Wed Oct 19, 2005 7:48 pm
by moto31
QUOTE
Originally posted by Happyboy
holy cow...the missouri dale owners are coming out of the wood work!! there are a few things you can do to get 3-4 hp out of the quad reasonably cheap. If you want 7 hp then I would go to at least the stroker.
My dad is the guy that bought your D&M from you.