Torque specs

[harleypitbull1]

Could somebody please give me some torque specs for inside the motor

I need to know


stage 8 bolts

the 2 allen bolts holding the chain tensioner in place also had red loctite

The main nut on holding the gear that the timing chain runs on the bottom it had red loctite on it

the small allen bolts that hold the oil pump on

and the clutch hub bolts

thanks for any help

also what bolts do I need to put loctite on and what color?

[cannondale27]

Every bolt and nut gets Loctite Red on big ones and blue on small is what I do.Timbo does red on all the bolts to not take any chances.You need a manual.Here are Stage 8 instructions with one Major correction.I recommend very thorough cleaning of bolts and bolt holes drying with air hose and then torquing all plate bolts to first stage and then removing one at a time in sequence Loctiting and then reinstalling to first torque one at a time then doing second stage.This prevents Loctite from getting between plate and case.