Page 1 of 1
Posted: Fri Mar 23, 2007 11:21 pm
by kaosracing666
im looking for a sprocket hub for a lonestar axle cant find one any where if u have one or no of any one that has one email me at Kris16@ptd.net or call 570-236-3136
Posted: Sat Mar 24, 2007 12:33 am
by nsane
im looking for a sprocket hub for a lonestar axle cant find one any where if u have one or no of any one that has one email me at Kris16@ptd.net or call 570-236-3136
Someone correct me if I'm wrong.. but cant you use a honda sprocket hub on that?
Posted: Sat Mar 24, 2007 12:45 am
by wright
i don't know about the Honda hub but you can use the stock cannondale hub and the Honda snap ring on the LSR, So i don't see why you couldnt use the Honda hub
Posted: Sat Mar 24, 2007 7:00 pm
by kaosracing666
the stock cannondale hub dosent fit my lsr and i call lsr dirctly and they said that only the hub that they made for it is the only one that will work and i tryed a cannondale hub the splines are off now im lost
Posted: Sat Mar 24, 2007 8:49 pm
by cannondale27
I know this sounds rash but I am doing you a favor.Ditch the Lonestar axle and go buy a Moto axle from BlackWidow.I spent more on sprockethubs for my Lonestar than I did buying a new Moto axle.The problem Lonestars have is not ever going to go away.Now if you must keep it find yourself a 250r sprocket hub which is steel.I think you have to turn seal area down on Lathe and add a spacer or something.Was 5 years ago I did that so memory is lacking but it can be done.
Posted: Sat Mar 24, 2007 9:14 pm
by claas900
I have the LSR,Im running both stock hubs. I dont know why the sprocket hub wont fit,its the same as the brake hub and LSR has you use the stock brake hub.
Posted: Sun Mar 25, 2007 12:34 am
by Happyboy
stock hubs on LSR here....the old LSR hubs sucked bad and would strip out.