Page 1 of 1
Posted: Sat Dec 13, 2008 9:14 pm
by cdale440r
need help, i've searched all over thinking this might have happened before couldn't find it. putting my hydro engine back together, my manual says 10 metal plates then 9 of the friction plates. i have 9 metal and 8 friction and no more will go on the hub. do the friction plates swell or something. if i soak overnight will that free up enough room for 1 metal and 1 friction plate. i have my cable engine apart and combined i have 18 metal and 17 friction. if anyone can help please do so. thanks
Posted: Sat Dec 13, 2008 9:39 pm
by desertbound
If you have the updated thicker fibers you will only have 9 in there.
Posted: Sat Dec 13, 2008 10:28 pm
by cannondale27
If thick its 8 Fibres and 9 steels. If thin 9 fibres and 10 steels. Desertbound is yours a thick or thin fibre clutch?
Posted: Sun Dec 14, 2008 2:47 am
by desertbound
I have kind of a hybrid. My clutch was still new but had a bent fiber. It was the thinner ones. So I put a thick fiber in to take the place of the bent thin one, and because of that didn't double stack the first steel.