Page 1 of 1
Posted: Wed Jan 28, 2009 10:57 pm
by 13vete
i turn the key and everything turns on. but when i try to start it i hear 1 click on the starter solenoid/starter. so i bought a new solenoid thinking that was it but still have same problem. sometimes there is a spark on the starter cable. Please help! thanks
Posted: Wed Jan 28, 2009 11:36 pm
by claas900
Just get a volt meter and start testing. Sounds like you have a break in the wiring somewhere, or a simple bad connection somewhere.
Posted: Thu Jan 29, 2009 1:13 am
by jniebuhr
sounds like a bad battery. had a similar problem down in glamis a week ago. if you can have the battery load tested.
![wacko.gif](http://www.cannondaleriders.com/forums/style_emoticons/<#EMO_DIR#>/wacko.gif)
Posted: Thu Jan 29, 2009 1:25 am
by wistech
Have you verified the engien isnt hydro locked or siezed?
Posted: Thu Jan 29, 2009 1:59 am
by claas900
Have you verified the engien isnt hydro locked or siezed?
I didn't think about that. 13vete you can take off the flywheel cover, if you don't know its on the right side,black with 4 screws holding it on. Once you get it off I think its a 17mm nut you can turn it with a ratchet.
Posted: Thu Jan 29, 2009 3:02 am
by 13vete
the battery is good. i'll check the wiring with a meter and check the flywheel. thanks for they help guys!