Page 1 of 1
Posted: Thu Mar 17, 2011 9:39 pm
by Sandstorm
I'm just wondering what the total cost of all updates in a motor would be including a Z400 bearing and new piston and liner along w/ all the other necessary stuff to make a motor last a very long time with labor.
Posted: Sun Mar 20, 2011 2:19 pm
by rocketronracing
me to
Posted: Mon Mar 21, 2011 12:43 am
by 67z400
If I recall correctly there is a excel file floating around the site with each cost itemized.
However, what is unclear is where to buy all of the parts. Is it as easy as calling up the site sponsors or are there other places to acquire parts?
Posted: Mon Mar 21, 2011 1:13 am
by riverat1540
If I recall correctly there is a excel file floating around the site with each cost itemized.
However, what is unclear is where to buy all of the parts. Is it as easy as calling up the site sponsors or are there other places to acquire parts?
I would say you could get it done right for about 800-1000 with porting and ready to drop in. As that is about what I paid assuming you have a good crank and do the assembly yourself
Posted: Mon Mar 21, 2011 5:24 am
by claas900
just some ball park numbers.
ported head around 450
updating good crank with z bearing around 160
both main bearing around 65
stock piston kit around 130
CP piston kit i think 450??
decomp rebuild around 50
if needed valve springs i think 11 a piece
highly recommended valve buckets 50 a piece
if cam needed i think around 90 each
misc. around 75
labor between 300 to 400, add 100 for pulling and reinstalling motor
again just some ball park Numbers