Suggestions on what adjustable fuel pressure regulator to use

[riverat1540]

Just looking for some insight on what others would suggest. I'm looking to buy a adjustable Fuel pressure regulator as I am moving to Harley injectors with this build, these to be exact http://www.summitracing.com/parts/edl-3583/applications
Not looking to break the bank but want something well suited and affordable for my application

[Canniboomer]

I would first try to determine your intended pressure rating... Our stock insert pod is 3.0 bar.
If you carry the stock one into a decent parts store, they could search one out and verify the same fit.
The pressure is shown on them. some examples:
http://store.034motorsport.com/fuel-pressu...-4-4-5-bar.html

http://www.bahnbrenner.com/vw_audi/product...ssure_Regulator

note most of the adjustable FPR's on the market are junk, and mounting to the Cannondale can be clunky and awkward, and even the smallest units are larger than the stock housing.

[riverat1540]

QUOTE (Canniboomer @ Mar 25 2014, 05:25 PM) <{POST_SNAPBACK}>

I would first try to determine your intended pressure rating... Our stock insert pod is 3.0 bar.
If you carry the stock one into a decent parts store, they could search one out and verify the same fit.
The pressure is shown on them. some examples:
http://store.034motorsport.com/fuel-pressu...-4-4-5-bar.html

http://www.bahnbrenner.com/vw_audi/product...ssure_Regulator

note most of the adjustable FPR's on the market are junk, and mounting to the Cannondale can be clunky and awkward, and even the smallest units are larger than the stock housing.

Thanks Dave I was not even thinking of being able to just change the pod. I will look into this. However at this time I am unsure as to what rating I will be requiring. This is why I thought an adjustable would be best based on what I have read here during my searches

[riverat1540]

Also I was over thinking this and seeing that I don't have the mc500 ecu it is not needed