Injectors

Message

FORDF3502 · #1 Post by **FORDF3502** » Mon Nov 09, 2015 12:41 am

Are all the injectors the same between the bikes and the quads I just picked up the x440 that was in the for sale section have injector pulse and fuel pressure but no spray I've got a extra set for the quad I'm a summing there stuck bike hadn't been run since 03 or has anyone had any luck cleaning them

POWER MAD MAN · #2 Post by **POWER MAD MAN** » Mon Nov 09, 2015 1:02 am

The qaud injecters are the same as the bike.

FORDF3502 · #3 Post by **FORDF3502** » Mon Nov 09, 2015 1:12 am

thanks

kdeal · #4 Post by **kdeal** » Mon Nov 09, 2015 2:02 am

Hey don't listen to him, he can't spell "quad"!

BUT, he is right.

who_gives_a6 · #5 Post by **who_gives_a6** » Mon Nov 09, 2015 3:07 am

I had luck with a stuck pair before putting them in carb cleaner to soak overnight. Sprayed well after doing that and some high pressure air through them.

wistech · #6 Post by **wistech** » Mon Nov 09, 2015 8:04 pm

I have had a few with stuck pintles before and all were freed by just sticking a long screwdriver up against the plastic body and giving a quick tap with something light (not a hammer). Never had to remove and clean. Once they get spraying the fresh fuel will dissolve the varnish in a minute or 2 .

kdeal · #7 Post by **kdeal** » Tue Nov 10, 2015 10:39 pm

What he said ^^^^^^^

FORDF3502 · #8 Post by **FORDF3502** » Thu Nov 12, 2015 1:58 am

Thanks for all the help got em free runs good now it's time for a valve cover and water pump impeller