Our kits vary in price and power, however they all carry the dependability enhancements listed in the DE1 (dependability kit). Please see below for a breakdown of the items/ services included in our kits.
ENGINE KITS:
DE1: Retail cost $1172***
* Decarbon Head
* Complete Inspection For Worn, Cracked Or Broken Engine Components
* Engine Mount Case Crack Prevention Update
* Throttle Shaft Calibration
* Rering (Gapless Ring Set)
* Adjust Valve Lash
* Cylinder Leak down Analysis
* Injector Flow And Polish
* Reengineer Head For Better Lubrication To The Valve Train
* Crank Plate Durability Enhancement
* Transmission Plate Durability Enhancement
* Machine Tune Defects In Transmission Gear Set
* Modify Shift Selector (ease shifting into neutral)
* Updated Torque Specifications
* Engine Gasket Kit
* Complete Engine Debur
* Inspect Crank Shaft For Trueness
Stage I: Retail cost $2086***
* Perpetual Flow Head Modifications
* Cam Timing Modifications
* Increased Compression
* Custom Map Ver. 1.1
Stage II: Retail cost $2466***
* Perpetual Flow Head Modifications
* Reangled Injector Bungs
* Cam Timing Modifications
* Increased Compression
* Custom Map Ver. 1.2
Stage III: Retail cost $3386***
* Perpetual Flow Head Modifications
* Reangled Injector Bungs
* Titanium Valves
* Beryllium Alloy Valve Seats
* Shimming Springs For Proper Valve Seat Pressure
* Cam Timing Modifications
* Increased Compression
* Custom Map Ver. 1.3
Comp IV: Retail cost $3916***
* Perpetual Flow Head Modifications
* Cast Sleeve, Custom Honed To Tolerance
* 450cc High Compression Big Bore Kit
* Shimming Springs For Proper Valve Seat Pressure
* Pressure Test Injectors
* Reangled Injector Bungs
* Light Weight Piston (reduced Vibration)
* Light Weight Wrist Pin
* Gapless Ring Set
* Titanium Valves
* Beryllium Alloy Valve Seats
* Cam Timing Modifications
* Custom Map Ver. 1.4
The "Monster": Retail cost $4282***
* Perpetual Flow Head Modifications
* Cast Sleeve, Custom Honed To Tolerance
* 460cc High Compression Big Bore Kit
* Pressure Test Injectors
* Reangled Injector Bungs
* Transmission Gear Ratio Modification
* Light Weight Piston (reduced Vibration)
* Shimming Springs For Proper Valve Seat Pressure
* Light Weight Wrist Pin
* Gapless Ring Set
* Titanium Valves
* Beryllium Alloy Valve Seats
* Cam Timing Modifications
* Custom Map Ver. 1.5
ADDITIONAL ITEMS AND "DO IT YOUR SELF"
Piston Kit (OEM Bore Size): Retail cost $395
* Lightweight
* Reduced compression increases dependability
* Quicker rev increases acceleration
* Reduces vibration
* 11.8 to 1 compression ratio
* Retains stock bore size
* Ready to bolt on
* Includes: light weight piston, wristpin, cast sleeve, circlips, and ring set**
Perpetual Flow Head Mods.: Retail cost $995
* Ads instant horsepower
* Includes cam timing performance enhancement
* Hand Lapped
* "Do it your self solution"
* Better lubrication to the valve train
* Ready to bolt on
* Custom Injection Map provided Ver. 1.1
* Race Proven
Crank Balancing (later models): Retail cost $99.95
Transmission Gear Ratio Modification: Retail cost $465.95
QT Package (noise reduction): Retail cost $99.95
* Modify Engine Tolerances
* Modify Clutch Basket
Case Repair: Retail cost $495.95
Thread Repair: Retail cost $36 each
Bering R&R: Retail cost $36 plus parts
Flow Test And Polished: Retail cost $49.95
Perpetual Flow Suspension Revalving: Retail cost $600.00
**Gaskets not included (for gaskets contact
www.cdaleparts.com)
***All engines shipped disassembled or in a non-operational state will be charged an additional $144 for inspection and damage estimate. All kits do not include any parts not listed in the description, all additional parts will be charged separately.
................................................................................
...
I will be having our website updated with the above information and an FAQ section added. Please feel free to contact me if you any questions, concerns or comments. We can be reached by email at
info@southbaymoto.com, via the web at
www.southbaymoto.com or by phone at 310-784-7690 under the Cannondale R&D option #3. Customer support is available Tuesday through Saturday from 9:00 am to 6:00 pm PST. Our shipping address is:
South Bay Moto
2101 Pacific Coast Highway
Lomita, CA 90717
Be sure to include the following when shipping your engine:
1. Engine, well packaged and padded to prevent shipping damage (86 lbs.)
2. Bottom cradle, or frame rail
3. Injector set sealed in an airtight bag to prevent contamination
4. ECU, again package well to prevent damage in transit
5. Throttle Body
6. Complete contact and return shipping information
Allow 4 to 6 weeks for turn around time. We thank you for your business.
Dustin
SBM