Page 1 of 1
Posted: Sun Dec 01, 2002 12:41 pm
by Knight440
Mine makes that same noise I think it might be the chain but I am not sure, I plan on check it again before next ride
Posted: Sun Dec 01, 2002 2:36 pm
by Cannibal440
My bike makes the same noise. I believe it is the chain.
Might have the answer
Posted: Sun Dec 01, 2002 3:59 pm
by AlaskaSpeed
Ben,
I had a noise that came up during a practice day at the track that sounded out of the norm and traced it to my chain rubbing on the small guard/bracket that bolts up right near the chain. It can get bent slightly and will actually contact the chain then. It is toward the rear of your quad above the rear brake pedal area....bolted to frame or subframe, trying to go off memory, just woke up............JIM
Posted: Sun Dec 01, 2002 8:03 pm
by 86atc250r
If you're in the lower RPMs, at light throttle, and the chain's a touch loose, the bottom slack will slap the frame cross tube near the chain roller. This is likely what you're hearing.
Posted: Sat Dec 07, 2002 2:27 am
by rowlrag
Ben it is the chain slapping check the manual fo settings, also the day you got it the rear master cylinder cover was bent and hitting chain did you fix it?