Engine, intake, exhaust, EFI, chain, sprockets, etc.
cdalepilot
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#1
Post
by cdalepilot » Mon Mar 15, 2004 4:39 am
has anybody had this problem with their chain adjustment system not working ? in other words won't take out the slack or give you slack . :confused:
cdalepilot
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#2
Post
by cdalepilot » Mon Mar 15, 2004 4:51 am
i've got 13/39 gearing. this is a new chain , but i can't get any slack .:confused:
cdale440
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#3
Post
by cdale440 » Thu Apr 01, 2004 5:47 pm
it should be 94 right
CdaleRacer0128
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#4
Post
by CdaleRacer0128 » Thu Apr 01, 2004 8:52 pm
im running 14/42 and have good chain slack with no half links but one problem si that my hole in the carrier is either on top of the axis line that they put in the manual, or just below it on the inside ofthe quad...hasn't done any harm yet, specially without the tm designs chain guard
TheJaspMan
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#5
Post
by TheJaspMan » Thu Apr 01, 2004 9:36 pm
Without sounding like an idiot, what combo did the moto run with 18"s? And is it the same length chain as the rest of the quads?
CdaleRacer0128
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#6
Post
by CdaleRacer0128 » Thu Apr 01, 2004 9:37 pm
i think the moto ran 13 x 38 or 39 but some have said 14x38/39 my manual says 13 front
USAMoto00
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#7
Post
by USAMoto00 » Fri Apr 02, 2004 12:27 am
Moto's are 14/40 with a 96 link chain.:usa (that's from the factory)
CdaleRacer0128
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#8
Post
by CdaleRacer0128 » Fri Apr 02, 2004 1:10 am
QUOTE
Originally posted by USAMoto00 Moto's are 14/40 with a 96 link chain.:usa (that's from the factory)
guess i found yet another fault in the 02 manual..they probably should have hired a better typer with less typos:confused:
TheJaspMan
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#9
Post
by TheJaspMan » Fri Apr 02, 2004 3:42 am
QUOTE
Originally posted by USAMoto00 Moto's are 14/40 with a 96 link chain.:usa (that's from the factory)
My book is wrong to.
So the all the Cdales came with a 14T front? And the rears were diffrent? Or am I backwards?:eek:
Jaybr
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#10
Post
by Jaybr » Fri Apr 02, 2004 4:57 am
Moto's came with 14/40 and all the others 13/42 I went to a 14 front and couldn't get a chain to fit either, 96 was too short, 98 too long. I'm now running 14/40 with a 96