Page 1 of 2
Webcam
Posted: Fri Mar 26, 2004 11:00 pm
by rope83
I talked to Webcam today and they told me the intake lift and exhaust lift of the stocker was .382/.352 and theirs is .415/.368 The duration of theirs is different also, just forgot what they told me. I don??????????????????t know how accurate the info is but I am sure some will let me know. Just another way to pull out some horses
Speaking of cams...
Posted: Sat Mar 27, 2004 7:20 am
by EuroGOD
Has anyone tried the cams from a Suzuki TL1000R?
Take a good look next time you see one of these engines...you'll be amazed at just how much C'dale "borrowed" in design.
As for cam options for the TL, look no further than the Yoshimura catalog.
A little birdie gave me this tip a long, long time ago....take it as you will.
Posted: Sat Mar 27, 2004 3:48 pm
by J. Delaney
So, how do the Suzook cams work in a Dale?
Posted: Sat Mar 27, 2004 6:18 pm
by rope83
??
Posted: Sat Mar 27, 2004 11:54 pm
by claas900
..I thought the WEB cams were a stock replacement?..unless something has been updated?
Posted: Sun Mar 28, 2004 12:10 am
by cannondale27
They are a stock replacement for the old FX400 motor.They will work but you will end up using bigger shims if you put it in the newer head.I know the lobe height on WEB and FX are bigger but I think the keeper is different also so you end up using bigger shims.From Suzuki.Never got an explanation why they changed this but I have said all along the FX's were faster.
Posted: Sun Mar 28, 2004 12:24 am
by claas900
..Sounds like its time to get some new cams?..
Posted: Wed Apr 21, 2004 7:42 am
by thomez
Anyone have plans to change to the Webcams?
Posted: Wed Apr 21, 2004 10:51 am
by wistech
I just so happen to need new cams .
Posted: Wed Apr 21, 2004 11:55 am
by josborn
I did until I saw that the intake cam was like $200 dealer cost! screw that.