Page 1 of 1
Posted: Tue Apr 20, 2004 1:34 am
by cdrookie
check your wiring. could be as simple as a bad start button. could be as bad as a locked up motor. does it click when you press the button? did you try to jump start it? what about running a jumper wire across the soloniod? put a meter on the battery and the soloniod to see if the battery is up to snuff. then put it on the solonoid and have someone press the start button to see if you're getting juice thru it to the starter. you could remove the starter and hit it with jumper cables to make sure it's good...just a few ideas...it doesn't sound like a serious wiring harness problem since the injectors are working. but i've been wrong once before:D good luck
Posted: Wed Apr 21, 2004 6:27 pm
by southbaymoto
It sounds to me like you may have crossed wires in the system. Is this a new bike or have you had it for a while?
Posted: Thu Apr 22, 2004 4:25 pm
by southbaymoto
I would be willing to bet it was wired wrong from the start. Check to make sure the buttons are wired into the correct plugs and not reverse. It sounds like they are crossed.
Posted: Sat Apr 24, 2004 2:53 pm
by cdrookie
what kind of troubleshooting have you done to it so far?
Ilgen,need more info
Posted: Sat Apr 24, 2004 9:27 pm
by Ryanstones
With the post you wrote, i was, and am stumped. This internet troubleshooting is a very collaborative effort you know? All the smart guys are off racing this weekend anway, but TWO 1/2 YEARS WITH NO PROBLEMS!!! And you just now sharing that info with cannondaleriders!????:confused:
I've never heard of your problem, and i've had my FX/cannibal for 2.5 yrs too. Bad relay maybe?
Post a pic. maybe that'll inspire somegoodman here to help out. LOL
:cool: