Page 1 of 2
stock cannondale hp
Posted: Sat Jul 03, 2004 11:01 pm
by 1 bad dakota
title says it al comeon guys be honest
Posted: Sun Jul 04, 2004 12:06 am
by kdeal
That would be 25hp.......(wink, wink).
I believe the stock motor at the crankshaft was "rated" @ 42hp. At the rear wheels would be less of course. Cannondale27 probably can tell you down to the 1/10th of a HP....
Posted: Sun Jul 04, 2004 12:18 am
by thomez
More than any other stock machine
Posted: Sun Jul 04, 2004 12:37 am
by Idahocannibal
A Cannondale brochure that I have say the cannibal and speed are 33 rwhp and the blaze and moto are 39.
Posted: Sun Jul 04, 2004 1:00 am
by Jaybr
There are some nice dyno charts in this thread
http://www.cannondaleriders.com/vbb/showth...&highlight=dynoStock motor with HMF exhaust pulled 40.1, I'm not sure if the HMF is any better than the stock FMF Ti on the Moto and Blaze or not.
Posted: Sun Jul 04, 2004 3:52 am
by haydug
I ran a new blaze and got 39-40 h.p. out of it, and with a ported head reached 46 h.p. This was on GT Thunder's dyno, and before 450 kits. I also wasn't at all familier with mapping at the time, so it was a moto map.
Posted: Sun Jul 04, 2004 4:33 am
by cannondale27
I got 42 with 450 and reangled injectors.There were some issues though.I hope to get back on dyno as soon as I get that one back together.
Posted: Mon Jul 05, 2004 12:08 am
by iceracer17
I got 41.5 with slipon muffler and my own airbox mod on a stock early 02' with the good piston.
Posted: Mon Jul 05, 2004 2:41 am
by Sandstorm
Are you guys useing knobbies or ????
Posted: Mon Jul 05, 2004 3:37 am
by cannondale27
Iceracer and I both used American Racers.Knobbies=less HP