Page 1 of 1
Has anybody used a web cam?
Posted: Tue Aug 10, 2004 6:14 pm
by Cody_300ex
Has and body used the web cam in there cannondale engines? I was considering that cam when I get my c-dale. Thanks
P.S. heres the specs on it
Lift: .415/.368
Duration: 268/261
Duration at .050: 244/235
Posted: Tue Aug 10, 2004 6:16 pm
by Cdale_racer_669
i didnt know they made cams for the cdales:wow
Posted: Tue Aug 10, 2004 6:48 pm
by Cody_300ex
heres the link to webs site.
http://www.webcamshafts.com/
Posted: Tue Aug 10, 2004 6:50 pm
by kdeal
This is reportedly the profile of the FX400 cams used in the earliest versions of the Cannondale quads. Since it uses the stock valve springs, it's not a huge increase in specs over stock. Also, remember this cam was designed to be used with a slighty higher compression ratio that came in the FX400. This would only mean it probably wouldn't have as much low end torque as the standard profile.
Posted: Wed Aug 11, 2004 4:14 am
by wanablaze
so would somebody with a southbay/wwe head benefit?
Posted: Wed Aug 11, 2004 9:54 am
by cdrookie
probably wanablaze. ryanstones said the cams didn't make much difference in his bike with the stock head.