Page 1 of 1
? about moving fuel pump
Posted: Tue Jan 25, 2005 3:07 am
by Blazinmoto
I am moving my fuel pump to be on top of electrics tray like Abbots quad. Question is, is it safe to screw a bracket to the frame in that region or how else to secure pump well enough there. Thanx:confused:
Posted: Tue Jan 25, 2005 4:53 am
by claas900
..I dong tink id be drilling holes in the frame?..If you wanted you can out it under the ECU tray,right in front of the steering steam...As far as i know it has to be mounted to the tray,i think useing over sized washers or some kind of mounting plate will add stranth to it.
Posted: Tue Jan 25, 2005 4:56 am
by haydug
yep, that's the place to mount it, you can also look for a dirt bike bracket to mount it with, it's a cool looking aluminum shield that holds the pump and regulater together. I have mine mounted on the subframe though.
Posted: Fri Jan 28, 2005 1:10 am
by FUGITV
heres what i did to mine
Posted: Fri Jan 28, 2005 2:01 am
by Blazinmoto
By that picture FUGITV, it looks like you screwed a bracket to the frame. Or is it screwed to the tray? Btw bad *** quad FUGITV.
Posted: Fri Jan 28, 2005 2:12 am
by FUGITV
i drilled a small hole then tapped it in the front portion of the frame ahead of the hollow section. basically, the cast piece that the shocks mount to.