Cannondaleriders

how do i go about removing the entire airbox, i got the top off, im stuck on removing the base, thanks

The bottom is held onto the throttle body by a large hose clamp that you will need to loosen.

thanks, is there any connections i have to unplug?

yes there are two they are on the right side bottom of the box one is a vacuum hose the other is a sensor that you need to unplug but you can get the air box loose and get it up to where you can get to them a little better.

also when to put the box back on put the clamp in a position to where you can get to it easier to tighten and loosen hope this helps:)

thanks for all the help

another question, which clamp do i take off. the one directly below the airbox, or the one below that on the throttle body.

I found it easier to loosen the bottom clamp that holds the boot on the intake. I'm a newbie though.

I like to say some mean things to mine, Then it usally backfires and blows the dam thing right off.....

i almost have it off, i have all the clamps loose, the two plugs unplugged, and it still wont slide off, what else do i need to loosen or remove, thanks.