Shocks, a-arms, swingarms, tires, brakes, etc..
patmc81
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#1
Post
by patmc81 » Tue Sep 27, 2005 12:12 am
how can you tell if a shock from a different atv will fit on a cannondale? Is it just the length of the shock
cannondale27
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#2
Post
by cannondale27 » Tue Sep 27, 2005 12:19 am
Length,travel,width,bushings,springrate,valving.Tough too beat a shock made right for quad you are putting it on.
patmc81
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#3
Post
by patmc81 » Tue Sep 27, 2005 12:22 am
I wish I knew the bushings,springrate,valving on the works tripple rates I have, they would look real pretty on the speed
patmc81
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#4
Post
by patmc81 » Tue Sep 27, 2005 12:26 am
how could I find out? just call works. dose anyone know what the Ohlins are?
JeffQuadShop
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#5
Post
by JeffQuadShop » Wed Sep 28, 2005 3:05 pm
There aren't any shocks off other quads that will work correctly on a Dale.
theJeStEr1340
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#6
Post
by theJeStEr1340 » Fri Oct 07, 2005 6:56 pm
400ex shocks work good enough though. I ran elka's off a 400ex for a year before I got my moto, now the elka's are on my dad's TT bike. Jeff says they prematurely wear on the ball joints though. I did break a ball once in the year (towards the end) I figured when I start bustin my balls I need new ones anyhow.
JeffQuadShop
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#7
Post
by JeffQuadShop » Fri Oct 07, 2005 8:46 pm
Honda shocks have too much travel for the Dales.
jacobw
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#8
Post
by jacobw » Fri Oct 07, 2005 9:01 pm
what about dale shocks on a z400 a kid bought mine and was putting on a z400 with stock width arms