Falicon Maps
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
Falicon Maps
Has anyone made a *Moto/Speed - TS110 - 10,900 map* or a *Blaze Traction/Speed - TS110 - 10,900 map* for a Falicon motor with stock bore piston?
Its gonna be a few months or so before the bike comes together, but i figured i'd ask early
Its gonna be a few months or so before the bike comes together, but i figured i'd ask early
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
We are going to specifically work on the bottom end issues.Plan to do dyno runs in 500-1000rpm ranges instead of wide open runs.I would like to say that not all quads run the same so be warned might not be perfect.Some tuning yourself might need to be made.Acarli has a map that I have tried that seems to work real nice as far as some with bottom end issues.We will be dynoing it also and making any changes we can.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
Alot of us are ported though.Flowrate and offset settings wont work for us.We are well out of range.In other words using stock map when enough fuel is added at top to get 13-1 the low end goes way rich.To get rid of that offset is leaned out so far that it also affects the top end which goes lean right with offset.Once we get a good map it will be easy to transfer those fuel and possibly timing settings to any maps.