2. For a motorcycle/minicycle to be approved, the manufacturer
must apply to the AMA, register the machine??????????????????s specifications,
provide photographs and prove that 100 identical, completed
machines of the same model are available for sale to the general
public at multiple dealer showrooms throughout all six AMA
regions. Newly approved machines are required to have carburetor's
that meet the specifications of the minicycle class. i.e. Class
1-14mm; Class 2-19mm; Class 3-12mm; Class 4-13mm. AMA staff
will verify production requirements. Application forms for motorcycle/
minicycle approval are available from the AMA. Theapproval procedure for the following model year will open August
15th and must be completed no later than the following March 15th.
a. Manufacturers and distributors must have a sufficient quantity
of spare parts to meet customers demand for a minimum of the
current model year being approved. Any parts determined to be
inadequate in design or construction may be upgraded by the
OEM approval process as defined by the AMA staff and must be
submitted no later than June 15 of the model year. AMA may
require one unit of each approved model and/or upgraded part(s)
to be provided for long term parts comparison.
This was straight from their rules. I am sure they can make exceptions. As for the motorcycle/minibike thing it states in the atv rules that this is the same for ATVS. You can look it up.
![smile.gif](http://www.cannondaleriders.com/forums/style_emoticons/<#EMO_DIR#>/smile.gif)