Shocks, a-arms, swingarms, tires, brakes, etc..
dsracer666
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#1
Post
by dsracer666 » Sun Mar 05, 2006 8:16 pm
how do the lower moto balljoints come out? are they pressed in? theres no clip of any sort on mine!
cannondale27
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#2
Post
by cannondale27 » Sun Mar 05, 2006 9:46 pm
There should be a clip and yes they are pressed in.
MyCannibal
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#3
Post
by MyCannibal » Sun Mar 05, 2006 10:20 pm
yeah there should be clip....if not just press that badboy out with the balljoint press.....then put clips on after you're done....WOW..no clip...you're lucky to be alive!!
dsracer666
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#4
Post
by dsracer666 » Sun Mar 05, 2006 11:19 pm
ya, no ****! I can see the groove where the clip should be thats why I asked! thanks guys
dsracer666
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#5
Post
by dsracer666 » Mon Mar 06, 2006 11:36 pm
well I just popped out a balljoint and it seems I've been running a year+ with no clips holding them in!
I guess theres no need for them!:confused:
MyCannibal
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#6
Post
by MyCannibal » Tue Mar 07, 2006 12:03 am
yeah right...wont find me runnin without clips!!!
harleypitbull1
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#7
Post
by harleypitbull1 » Tue Mar 07, 2006 3:25 am
You wont catch me running the stock ball joints at all. I have seen three break on 2 different quads. Check into some a arm mods with aftermarket ball joints. ALOT SAFER. in my opinion, but I guess everyone has one of those
NRath
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#8
Post
by NRath » Tue Mar 07, 2006 5:12 pm
Actually, if you think about the forces involved, you were relatively safe riding without the clips.
MyCannibal
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#9
Post
by MyCannibal » Wed Mar 08, 2006 12:50 am
those clips need to be there....I dont care who ya are!!!!