![](http://bikepics.com/pics/pics/cannondale-cannibal-01-bikepics-559861.jpg)
Dissapearing exaust trick
I have created a problem. I rebuilt my exaust about a month ago. I took it to a machine shop and had it redone. Since its a big gun, it was falling apart. I put larger rivets in the rear, that worked great, but I also had the manchine shop tap the end cap and bolt in on so I wouldnt be drilling rivets next time I had it repacked. Well, they left about a 3/32 gap. The end cap doesnt fit flush and Im looking all my packing. I took the cap off yesterday and found that theres a small piece of packing the size of my fist left, and as you can see that isnt going to be there long. I dont have many ideas. I thought about a high temperature o ring or maybe some high temp form a gasket type stuff. I got an o ring streched around it, but it was too thick and I couldnt get my bolts started. Any ideas for me?
![](http://bikepics.com/pics/pics/cannondale-cannibal-01-bikepics-559861.jpg)
![](http://bikepics.com/pics/pics/cannondale-cannibal-01-bikepics-559861.jpg)
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm