Who's making the power?What Vendor?
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
Wade called today and is intersested in sending up his new head design for comparison. I know some people have had problems with Wade in the past ,but this truely shows he is in it for the long run and may have a wicked new setup for our dales.Anyone striving to continually improve should be saluted.I know 1st hand coming up with new designs takes alot of time and $$$.
Now remember this is ONLY going to happen if more people donate.The more product testing we do the more $$$ its going to take.Pipe shootout will also be interesting.I know 1st hand if we test everything with every possible setup it can be a few days straight of testing.The other thing to note is that this is for no profit everyting over the cost will be donated to the site.This is a good way to give back and to benefit any rider looking for performance.
Now remember this is ONLY going to happen if more people donate.The more product testing we do the more $$$ its going to take.Pipe shootout will also be interesting.I know 1st hand if we test everything with every possible setup it can be a few days straight of testing.The other thing to note is that this is for no profit everyting over the cost will be donated to the site.This is a good way to give back and to benefit any rider looking for performance.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
QUOTE (azcannon @ Apr 6 2006, 11:34 PM) <{POST_SNAPBACK}>
PPlease post a link for other thread you wanted merged.
I will make sure its a Sticky
I will make sure its a Sticky
http://www.cannondaleriders.com/forums/ind...topic=16248&hl=
should be merged- same topic and subject. Feel free to delete this when merging.
Glad it's a sticky!
My head is ported for my 50000 ft elevation.. We have much less air and DAB says he has to port more for velocity then anything else.. Unfortunately nobody else has a head ported by him. He has my starting flow numbers and the final numbers from the porting. Since my head was partially ported before he couldn't get a bone stock number... My dyno numbers are coming on Monday w/ my current set up.. My Athena flows 37% bettter then stock and I wouldn't hesitate to race any big bore Dale no matter who makes it.. Everyweek I gotta hear my brother say, I made a mistake selling the Athena..
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
Its in the other thread.These two should be combined.
http://www.cannondaleriders.com/forums/ind...showtopic=16248
http://www.cannondaleriders.com/forums/ind...showtopic=16248
QUOTE (Sandstorm @ Apr 7 2006, 03:28 PM) <{POST_SNAPBACK}>
My head is ported for my 50000 ft elevation.. We have much less air and DAB says he has to port more for velocity then anything else.. Unfortunately nobody else has a head ported by him. He has my starting flow numbers and the final numbers from the porting. Since my head was partially ported before he couldn't get a bone stock number... My dyno numbers are coming on Monday w/ my current set up.. My Athena flows 37% bettter then stock and I wouldn't hesitate to race any big bore Dale no matter who makes it.. Everyweek I gotta hear my brother say, I made a mistake selling the Athena..
50,000 feet ? Dang thats half way to outer space. Are you jumping Sand Mountain? LOL
Hey Sand you know Athena pistons are made by ASSO . The company that makes the good stock Dale pistons.