Mini CNC
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
Additonal research indicates that although the Sherline would work fine for me. I will probably purchase a little heavier duty maching. Still in the Micro deptartment. Seems that there are several that can be modified to CNC for under the cost of the Sherline and bring better repeatable parts to the world. Gecko Drives, steppers/servo, Cad, Cam, etc.
Alot of research pending but it should be some fun putting together. Now if I was electrically competent, I would source my own and go from there.
Smitty
Alot of research pending but it should be some fun putting together. Now if I was electrically competent, I would source my own and go from there.
Smitty