need settings please

Message

speed 450mx · #1 Post by **speed 450mx** » Tue Oct 02, 2007 6:48 pm

2003 moto 5B6EB313X2B000036 THANKS

kdeal · #2 Post by **kdeal** » Wed Oct 03, 2007 2:47 pm

VIN #5b6eb313x2b000036 was a 2002 Moto with motor #53 & was dynoed on 1/27/02 @7:50am. Max throttle volts: 4.39, min throttle volts: 0.27, throttle position: 3.2 @ 2037rpms, injector flow: 2400, inj offset: 0.75, AFR: 11.9, AFR Full: 13.1, oil press @ idle: 2.5, oil press @ rev: 5, done by employee: rr.

Good luck!

speed 450mx · #3 Post by **speed 450mx** » Thu Oct 04, 2007 2:42 am

Did it not not have tb leakage? Thanks for the help

kdeal · #4 Post by **kdeal** » Thu Oct 04, 2007 4:38 pm

QUOTE (speed 450mx @ Oct 3 2007, 10:42 PM) <{POST_SNAPBACK}>

Did it not not have tb leakage? Thanks for the help

No, it was 0.0.

Speed 1B · #5 Post by **Speed 1B** » Thu Oct 04, 2007 6:33 pm

Hey Kdeal ill take some settings for my 03 Speed too.

Vin- 5B6CD31G93B000003.

Can you tell if motor number AAA5B3000168 is original too? Not sure if thats somthing you can tell or not...

Thanks,
Brady

speed 450mx · #6 Post by **speed 450mx** » Thu Oct 04, 2007 8:50 pm

thanks Kdeal

kdeal · #7 Post by **kdeal** » Fri Oct 05, 2007 1:59 am

QUOTE (Speed 1B @ Oct 4 2007, 02:33 PM) <{POST_SNAPBACK}>

Hey Kdeal ill take some settings for my 03 Speed too.

Vin- 5B6CD31G93B000003.

Can you tell if motor number AAA5B3000168 is original too? Not sure if thats somthing you can tell or not...
Thanks,
Brady

VIN #5b6cd31g93b000003 was a 2003 Speed with motor #3-168 & was dynoed for the second time on 7/08/02 @7:06am. The settings were as follows, max throttle volts: 4.59, min throttle volts: 0.32, throttle offset: 1, throttle position: 3.8 @ 2004rpms, injector flow: 2400, injector offset: 0.9, AFR: 12.4, AFR full: 13.5, oil pressure @ idle: 3.5, oil pressure @ rev: 8, done by employee: ig as a rework (2nd go around) with 154 amps @ 4500rpm.

So the motor is original!