I spent a few hours today cleaning engine parts when I noticed the date printed on the inside of the engine side cover.The date is 9/11/2001.
Does anyone know if this date is when the engine was assembled or when the side cover was made?
engine date
QUOTE (kdeal @ Feb 9 2008, 08:30 PM) <{POST_SNAPBACK}>
Post the VIN number from the frame and the engine number on the back of the motor and I will get you some more info.
Engine number is AAA5B1000834, VIN # is 5B6BB31362B000330. Thanks. gary
VIN #5b6bb31362b000330 was an early 2002 Canibal with motor number #834 & was dynoed on 9/19/2001 @ 10:41am. The dyno specs were: Max throttle volts: 4.84, Min throttle volts: 0.34, Throttle Position: 3.4, @ 2087rpm, Inj Flow: 2603, Inj Offset: 0.88, AFR: 11.9, AFR full: 13.5, oil press @ idle: 4, oil press @ rev: 8.5, done by employee: ig.
Your motor is a 2001 motor and it is the correct motor for the frame number you provided.
Your motor is a 2001 motor and it is the correct motor for the frame number you provided.
VIN #5b6cd31g83b000039 was a 2003 Speed, with motor #3-241 and was dynoed on 6/24/2002 @ 7:11am. Max throttle volts: 4.41, Min Throttle Volts: 0.34, TGhrottle Offset: 0.5, Throttle Position: 3.6, @ 1993rpm, Inj Flow: 2350, Inj Offset: 1.0, AFR: 12.4, AFR @ Full: 13.5, oil press @ idle: 4.5, Oi press @ rev: 8.5, done by employee: ig as a line item with a2 ecu, rev 204 4k hex code & 157 amps @ 4500 rpm. The motor does not appear to be the original one, I show it coming in a Cannibal.