Shocks, a-arms, swingarms, tires, brakes, etc..
Nickc711
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#1
Post
by Nickc711 » Tue Mar 25, 2008 3:22 pm
I bought my dale w/ 2+ arms in the front, but a stock cannibal Axle in the back, would it be better to upgrade the rear axle also?
Nickc711
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#3
Post
by Nickc711 » Tue Mar 25, 2008 3:55 pm
Yes.
well anybody have a cheap used 2+ axle, this project is close to over budget.
jesshamner
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#4
Post
by jesshamner » Tue Mar 25, 2008 7:54 pm
You can gain a little by using some honda hubs.
Nickc711
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#5
Post
by Nickc711 » Tue Mar 25, 2008 8:54 pm
I thought the splines were slightly different and led to premature ware?
jesshamner
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#6
Post
by jesshamner » Wed Mar 26, 2008 2:08 am
450r splines are exactly the same. 400ex hubs will work but they fit tighter than the cdale hubs which I think its better. I like the 450r hubs way better than 400ex though. I have used both. I am currently running 450r hubs.
rayspeed
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#7
Post
by rayspeed » Wed Mar 26, 2008 4:21 am
azcannon had what I would assume were cnc'd billet hubs on his that extends the axle and they are very lightweight too. The price was not too bad if I remember right. Anybody know who sells them and for the best price? Ray
thedeatons
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#8
Post
by thedeatons » Wed Mar 26, 2008 12:44 pm
They are Rocky Mt. ATV brand. Cdsracer also has them. He stripped one pair, but Rocky Mt. replaced them. They seem to work well!
Nickc711
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#9
Post
by Nickc711 » Wed Mar 26, 2008 1:23 pm
is the wheel bolt pattern the same?